The Musical Instrument Thread

Happy hour starts in 5 minutes
Oh shit! šŸ¤ŖšŸ«£

Seriously thinking about this to easily supplement my heavy duty board. Guitar>QC>Lehle>Amps for ease of play in the living room.

Quad Cortex

The most powerful floorboard amp modeler on the planet
neuraldsp.com neuraldsp.com

 
RedWolf said:
Oh shit! šŸ¤ŖšŸ«£

Seriously thinking about this to easily supplement my heavy duty board. Guitar>QC>Lehle>Amps for ease of play in the living room.

Quad Cortex

The most powerful floorboard amp modeler on the planet
neuraldsp.com neuraldsp.com

Click to expand...

 
I think i am going to pull the trigger on this. Girlfriend #8.



GuitarPhotos_455720111.jpg


GuitarPhotos_455720112.jpg


GuitarPhotos_455720114.jpg
 
RedWolf said:
I think i am going to pull the trigger on this. Girlfriend #8.



View attachment 11353

View attachment 11354

View attachment 11355
Click to expand...

Beautiful! Have you played nylon previously?

(PS- If you donā€™t find a seller that has it in stock I can happily refer you to a great Taylor retailer that can save you some bucks on a Taylor factory order (15-20%) + no tax, free shipping, and a full factory pre-ship inspection. The owner assisted me with my 618 LH purchase. A 10 out of 10 experience.)
 
That's a pretty guitar - I love the zodiac inlay. Don't know if I could pull off the 'Be Love' lol...
 
Oh shit! Look what arrived this morning!

20250611_153424.jpg


20250611_153400.jpg


šŸ˜šŸ˜šŸ˜

After playing it for a few hours the sound is fantastic and so is the action. It is a beautiful guitar.

I am 60 and my girl is almost 28. I just told her that when I die? I want this guitar to go to our son or our daughter. It's that beautiful ā¤ļø
 
Last edited:
Jamming/learning this today. Not difficult. Using the new nylon Taylor and my PRS

 
Just did a refresh and set this up today - will see how it sounds tomorrow. Pretty excited for it to be honest... :)

New Set-up.jpg
 
RedWolf said:
iheartskins how long was the wait for the KOT?
Click to expand...
About 3 days from reverb :) - am slightly concerned that my wait list request from 2022 will not be made before they run out of parts and/or Mike Piera stops (/God forbid something happens to him) so I just caved and bought one.
 
iheartskins said:
About 3 days from reverb :) - am slightly concerned that my wait list request from 2022 will not be made before they run out of parts and/or Mike Piera stops (/God forbid something happens to him) so I just caved and bought one.
Click to expand...
Top dollar.

Is it all that they make it out to be?
 
RedWolf said:
Top dollar.

Is it all that they make it out to be?
Click to expand...
I really do like it - but if you tested me on how it tonally, objectively differs from the 20+ other overdrive/bluesbreaker-esque/tube screamer-esque/Klon clones/etc. that I have, would I reliably be able to differentiate it? I'm honestly not sure. I feel the same about distinguishing (reliably/consistently) between the sound of most OTR Teles even though that's what I spend 95% of my time playing (albeit a high-end clone from a different manufacturer who worked in the Fender Custom Shop).

I'm not sure the KoT is worth it, but I do really like it. I'm sure there are pedals that are just as good or better that aren't as expensive.

I'm a pretty poor witness though, as after I put together that pedal board in the above picture, I did relatively quickly take the instrument cable from my Suhr and just plug it directly into the Milkman One Watt and skipped the whole signal chain.

As much as I like pedals (and reading about them/collecting them and futzing with how to make them sound "best"), for me it's really hard to beat the sound of a good guitar going directly into a good tube amp. That's just me though. :)
 
iheartskins said:
I really do like it - but if you tested me on how it tonally, objectively differs from the 20+ other overdrive/bluesbreaker-esque/tube screamer-esque/Klon clones/etc. that I have, would I reliably be able to differentiate it? I'm honestly not sure. I feel the same about distinguishing (reliably/consistently) between the sound of most OTR Teles even though that's what I spend 95% of my time playing (albeit a high-end clone from a different manufacturer who worked in the Fender Custom Shop).

I'm not sure the KoT is worth it, but I do really like it. I'm sure there are pedals that are just as good or better that aren't as expensive.

I'm a pretty poor witness though, as after I put together that pedal board in the above picture, I did relatively quickly take the instrument cable from my Suhr and just plug it directly into the Milkman One Watt and skipped the whole signal chain.

As much as I like pedals (and reading about them/collecting them and futzing with how to make them sound "best"), for me it's really hard to beat the sound of a good guitar going directly into a good tube amp. That's just me though. :)
Click to expand...
I'm trying not to go off the deep end with my responses LOL! Too many guitars, pedals and amps...so I get it. I am addicted to tone!

New pedals inbound. Had them before but sold them due to the divorce. Pete Cornish is A1

G2 is germanium fuzz think 70s Marshall rock. The G-2ā„¢ gives a higher level of overdrive for that classic cranked up Marshall sound found on most British rock records of the 70s (Led Zeppelin, Free, Bad Company etc.). The G-2ā„¢ with its warm Germanium qualities and higher gain starts at around the rhythmic crunch stage of the SS-3ā„¢ and continues through in controllable degrees to a rounded but dynamic lead.



P2 is a smoother Big Muff...think Comfortably Numb. The PETE CORNISH P-2ā„¢ is highly recommended for a fat, high-gain, searing lead sound and is perfect for solos and heavy rock rhythm work. This pedal is used prominently by David Gilmour of Pink Floyd and Paul McCartney. The P-2ā„¢ā€™s full, bright sound cuts through the mix effortlessly and was the recipient of the Editor's Pick Award from Guitar Player Magazine,

 
Last edited:
Sounds awesome! I have a Geranium Fulltone OCD. Another one that sounds good. I have a lot of FOMO when it comes to small maker overdrive pedals, even if I don't have them "on" most of the time...!
 
Cornish pedals on order!!! Crazy prices in GBP :(

Final board #1 (of 2) layout below, also signal and power. Ignore the power strip for now. Pink indicates high power requirements (PC2A should be pink). Orange indicates high end buffer/line driver built in.

image004.png


image001.png
 
Last edited:
Inbound. ETA Tues? Customs charges were $140! šŸ˜”

More examples
I will us a Buffalo FX PowerBooster before my fuzz section and a Buffalo FX TD-X after. The P2 is smoother and has more mids vs. the P1.



Also have this inbound for board 1

pedaltrain.com

Pedaltrain XD-24 with Tour Case

PEDALTRAIN XD-24 The XD series is a new form factor from Pedaltrain. Six rails. Novo spacing. Extra deep mounting surface. Stack pedals three deep? Can do. Add a switching system? No problem. Expression pedals? Of course! Fully compatible with accessories like VDL-MK, Boosters, TFMK-SM and all...
pedaltrain.com pedaltrain.com

CIOKS DC7 - Premium Danish-Made Power Supply with Isolated Outputs

Discover the CIOKS DC7, a Danish-made power supply featuring seven isolated outputs, balanced power, and a 5-year warranty. Perfect for professional pedalboards, built to last since 1991.
cioks.com cioks.com

Also using an existing PP2+

I will post build photos
 
Pedaltrain X24 with hardcase arrived!
Cioks 7 PS arrived!
Cornish pedals arrived!

Christmas in July!!! šŸ˜€
 
Made some progress today
1. Power supplies installed
2. Velcro deck installed
3. Pedals mounted
4. 80% of signal cabling installed

Still a lot to do...

20250722_183327.jpg
 
You must log in or register to reply here.

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Help Users

You haven't joined any rooms.

    You haven't joined any rooms.
    Top